We understand that technology can be frustrating when you don't know what's wrong with it. Here are a few quick tips that might help you when things aren't going your way:    

My GPS has no ‘Sats’:

Your Trimble GPS system will have a few configurable connection protocols. The protocols determine the accuracy of your GPS positioning and are normally set at time of purchase. At some point your protocol may become corrupt or lost. To correct this simply go to “check status” and ensure that the correct protocol is selected.

My Trimble steering has dropped out:

There are several Trimble steering options available. This problem is normally caused by a power issue to the steering. Check the power connection, if the power is not reaching the steering then check the cabling.

My Trimble screen is frozen:

Frozen screens are normally fixed by simply removing the power to the screen for 60 seconds, reinstalling the power plug and turning the screen back on. If the screen is still frozen or the screen is showing ‘finalising firmware update’, return to your dealer for further investigation.

My Memory is Full:

Check the status to determine the available memory. If you receive a message stating that anymore fields cannot be created because the data is full, go to display settings and clear the coverage logging.

If you have any other questions about your Trimble products, don't hesitate to contact us and speak to one of our SprayerBarn experts. 
Leave a comment for this post here
Post has no comments.